Specifications
Page6of30
3) BOOM-BARRIER AND TURNSTILE:
(i) DESIGN CONCEPT
Gate automation system proposed for CDRI Campus consist of Boom Barrier & turnstile to restrict/
control/ monitor entry of vehicles and peoples to the administrative and laboratory area of CDRI.
• Boom Barriers are proposed to be installed on all the roads leading towards administrative and
laboratory area of CDRI Campus are as follows:
- Boom- barrier at main gate of the CDRI campus without access control units
- Boom-barrier on other locations with access control units.
• A rising boom barrier shall mean a vehicle access barrier that shall open in case of an impulse
with the use of a valid card. Vehicle of people authorized by the CDRI Management shall enter
into the restricted area.
• Separate Boom Barriers are proposed for two and four wheel vehicle.
• Boom-barriers which operate automatically utilize induction loops to detect the approaching
vehicles with the help of loop detector.
• The turnstiles are proposed to be installed at all security checks of CDRI campus to regulate the
entry of pedestrians.
• All the turnstile shall be operated through proximity card based access control units. People with
valid proximity cards can enter into the main administrative building.
• Provision for manual operation shall also be produced by the vendor.
• Purchaser’s LAN network being laid by third party would be utilized to extend the Boom Barrier
and Turnstile connectivity to central server.
• All boom Barriers/Turnstiles shall have connectivity to non- PoE port of purchaser’s networking
switches on LAN.
• UPS Power supply for each Boom Barrier /Turnstile.
• Tentative locations of Boom Barrier/Turnstile are indicated in the IP CCTV, ACS , Boom Barriers
and Turnstiles layout drawing enclosed with this tender.
• JBs , power supply etc. shall be in IP-66 housing.
(ii) SCOPE OF WORK
• Supply, installation, testing, connecting and commissioning a high quality fast-acting gate
automation system at CDRI campus.
• The entire system should be as per BOQ, drawings and technical specifications mention under
this part.