Specifications
Page5of30
• The ACS shall be a software-based solution and shall be flexible enough to work with multiple
Hardware providers. The software shall include all the features /requirement for ACS as specified
in the specifications
• The ACS shall be based on TCP/IP network protocol and shall communicate with Ethernet ready,
TCP/IP based components.
• The ACS software shall be capable of running on windows or Linux server platforms with full-
feature operation.
• The Controller shall be capable of operating independently if communications with the Host
Server is lost.
• Provide supervisory specialists and technicians at the job to assist in all phases of system
installation, start up and commissioning.
• Cat 6cable/fiber cable connectivity with all required hardware upto purchaser’s networking
switches of LAN, locations of networking switches in CDRI campus are indicated in the list.
enclosed with this tender documents.
• 230 volts AC Power supply distribution from UPS to each location of ACS along with DBs ,JBs,
cabling work etc. with required accessories.
• Power supply unit as required for ACS.
• Integrated testing and commissioning of ACS on LAN being provided by the third party in CDRI
campus
• Training & handing over of all materials, equipment and appliances
• Any other items/accessories required for installation, testing and commissioning of
Access Control system.
• No extra cost shall be paid for any miscellaneous items, if required to complete the work as per
design concept.