Specifications
Page16of30
- Drag & Drop functions for most functions on the system and also for set up of connection
between cameras and monitors and also support to create custom layout by grouping of
cameras from different server/ locations into groups for more efficient monitoring.
- Several simultaneous live picture connections of camera in network. It should be capable of
showing video pane layouts including 2x2, 3x3, 4x4, 5x5,8X8 various Hot Spots (1+5, 1+7,
1+9, 1+12, 1+16) and custom layouts
- It shall be possible to display video and audio bit rates; frame rate and resolutions on each
video pane as overlays.
- The live view must be capable of highlighting motion as green rectangle overlays and
displaying real-time alarm information overlayed on the live video feed.
- It shall be possible to listen to audio from individual codec (cameras) or Receivers.
- Audio must be simultaneously transmitted from the Operator to allow a two-way conversation.
- It must be possible to establish bi-directional audio connection on alarm. The user should
also be able to disable listen when speaking to prevent feedback through the microphone.
- System setup for pre-defined surveillance tasks to be invoked at pre-defined times in the day.
- Programming of automatic recording events on NVR, maybe based on events such as alarms
and video analysis
- Remote maintenance of IP Video components
- Off line construction of site ‘tree’ and addition of devices
- It shall be possible to show text on screen display (OSD) when video is displayed on a
Receiver/Decoder.
- The location of the OSD must be configurable on the screen
- The system should provide Video Lockout facility where a super-user can prevent all other
users from viewing live video and divert recorded video to another Networked Video
Recorder. The super-user shall also be able to release the video lockout and restore the
system to its original state. It should also support software watchdog for advance detection of
problem & recovery at server.
• The VOCMRPS shall allow the following:
- Live display of cameras
- Live display of camera sequences, salvos and guard tours
- Control of PTZ cameras digital zoom
- Playback of archived Video at speeds of x1/4 – x16
- Retrieval of archived Video using normal playback, thumbnails (motion, event or time based)
- Instant Replay of Live Video
- Use of site maps and Google map
- Configuration of system settings
• For each camera set up bit rate, frame rate, and resolution shall be set independent of other
cameras in the system. Altering the setting of one shall not affect the settings of other
cameras.
• PTZ Operations:
- Named presets (up to 256) and custom commands (up to 256) must be supported per
camera, invoked from VOCMRPS.
- User priority between 1 and 10 must be allocated for PTZ enabled Transmitters.
- The software should allow for using area maps /Google map
• The software system should be capable of handling camera and alarm icons on area maps.
The area map should be configurable to pop up upon the receipt of an alarm received from a
video codec on the map. This can be on the same or other monitors on the PC.
• The Software system should allow direct connection of control keyboard to the PC
workstation running the VOCMRPS for virtual matrix operations.