Specifications

Page13of30

• Each stream Bit-rate should be user configurable from 32 to 4096 Kbps
• The IP Camera will have a built in web server, making it accessible for configuration using a
standard Internet browser.
• The IP Camera must be compatible to support advanced analytics software which should be able
to perform the following:
- Intelligent Motion Detection
- Virtual trip wire
- Left item detection
- Theft detection
- Object tracking
- Counter flow detection
• Must have 1 alarm inputs and 1 relay outputs
• The IP Camera must support redundant recording by streaming to multiple recorders at the same
time.
• Should be able to detect motion based on localized area, object size & direction
• It must be possible to reset a unit back to Factory Default configuration without losing IP address
information.
• Video Output PAL/NTSC
- Composite Video
• Serial Data Port supporting RS232/ RS422/ RS485
• Password protected Web interface for administration
• Should have onboard diagnostics facility for serial, Video & Network interface. System logging
shall be possible to a remote IP address, the console port or the unit itself.
• Must support a standard operating temperature range 0 to +50
۫ C with extended temperature
range units available from -10
۫ C to +60 ۫ C
• The system MUST be able to use one particular frame rate and resolution at Day time and
automatically switch to another frame rate/resolution profile when low light conditions occur
• The system MUST allow for Telnet/FTP access into the units and also this access MUST be
configurable, wherein when active access is allowed and when deactivated access MUST not be
allowed.