Installation guide

XT30/XT50 Programming Guide Digital Monitoring Products
19
SySTem oPTionS
8.14
TIME DSP NO YES
Time Display
YES allows the keypad to display the time and day in the Status List. When NO is
selected, time and day of the week are not displayed.
8.15
HOUSE CODE: 0
House Code
When using a DMP wireless system, enter a house code between 1 and 50 for
the wireless system to use. The DMP wireless receiver automatically programs
the house code into the wireless transmitters when the unique transmitter
serial number is programmed into the panel. See Wireless programming in Zone
Information. Default is 0 (zero) indicating the DMP wireless system is not being
used.
The house code identies the panel, receiver, and transmitters to each other. When
operating, the receiver listens for transmissions that have the programmed house
code and transmitter serial number.
Note: The exibility of DMP two-way wireless operation allows an existing house
code to be changed in the panel at any time. The transmitter may take up to two
minutes to learn the new house code and continue operation.
Note: When any wireless zone programming is changed in the panel, wireless
receiver zone programming is updated by the panel. At that point, all wireless
zones display as normal for up to 1 minute, regardless of the actual state of the
zone.
8.15.1
DET JAMNG NO YES
Detect Wireless Jamming
This option displays when the House Code entered is for a DMP 1100D Series
Wireless system. When enabled and the receiver detects jamming, a trouble or
alarm message is sent to the receiver and displays in the Status List. Select YES
to enable jamming messages to display in the Status List. Select NO to disable
jamming messages. Default is NO.
8.15.2 Wireless Audible Annunciation
This option displays when the House Code entered is for a DMP 1100D Series
Wireless system (1-50). Press any top row key to select the keypad buzzer
annunciation method for wireless low battery and missing messages.
Select ANY to enable annunciation anytime. •
Select DAY to enable annunciation except during sleeping hours (9 PM to 9 AM).•
Select MIN (minimum) to annunciate only Fire and Fire Verify zones during •
daytime hours (9 AM to 9 PM). Default is DAY.
8.16
KPD PANCS NO YES
Enable Keypad Panic Keys
This option allows the two-button panic key operation selected at a keypad to send
the Panic, Emergency, or Fire message to the central station receiver. Select YES to
enable the two-button panic operation. To disable the two-button panic operation,
select NO. Default is YES.
8.17
OCCUPIED PREMISE
NO YES
Occupied Premise
Select YES to allow the panel to automatically disarm the interior area(s) when
arming all areas and a perimeter exit zone is not tripped during the exit delay.
This False Alarm Reduction feature will keep a user from arming the entire system
when they do not exit and remain in the premise. Select NO to not automatically
disarm interior area(s). Default is YES.
ANY DAY MIN
WLS AUDIBLE: DAY