User`s guide

User Menu XRSuper6 User’s Guide 23
User Codes
User Code Level: Master only.
Function: Allows you to add or delete a user from the system or
change their user code or authority level.
User code characteristics: There are three characteristics
associatedwitheachusercodethatdeneitscapabilitieswithin
the system.
Characteristic Example
User Number 12
User Code 3456
Authority Level Master
User Number - Your system supports 16 users. Each user is
numberedfrom1to16.Thisnumberidentiesthemtothesystem
and can be transmitted to the central station (if your system is
monitored) when they arm or disarm the system.
User Code - Users also have a 4-digit user code they enter into the
keypad when arming or disarming. This user code is kept secret
from other users and is not transmitted to the central station when
they arm or disarm.
Note: A User Code cannot begin with zero and cannot be left
blank.
Users enter only their own user code when operating the system.
Authority Level - The user is also assigned a level of authority
(Master or Standard) by the person administrating the system to
determine the functions the user can access.
The table below lists system functions users are allowed to access
based on the authority level assigned to their codes at the time
they are added to the system.
User Menu Option Standard Master
Arm and Disarm Y Y
User Checkin Y Y
Zone Activity Check Y Y
Sensor Reset Y Y
Outputs On/Off Y Y
Bypass Zones Y Y
Zone Monitor Y Y
System Test Y Y
User Codes Y
Set Time Y
Display Events Y Y
Service Request? Y