Installation guide

LT-0624 (5/06) © 2006 Digital Monitoring Products, Inc.
800-641-4282
www.dm p.c om
Made in the USA
INTRUSION • FIR E • ACCE SS • N ETW ORK S
2500 North Par tne rship Boulevard
Springfield, Mi sso uri 65 803 -88 77
OPERATING INSTRUCTIONS MODEL XRSuper6/XR20/XR40 PANELS
When using Model 692 LED Keypad, please refer to 692 User Guide (LT-0275)
NORMAL STANDBY CONDITION
When the system is in the normal standby condition, the keypad shows either the time of day/System Ready or
a blank display.
ALARM CONDITION
When the system is in an alarm condition, the keypad keys glow red and the display shows the violated zone
name(s) followed by an alarm display.
ARMING THE SYSTEM
Press the COMMAND key until arming options appear. Press Select key under the arming option desired, then
enter your user code.
DISARMING THE SYSTEM
All/Perimeter and Home/Sleep/Away Systems: Enter your user code. If the system is in alarm the keypad will
display DISARM SILENCE. Press the Select key under DISARM.
Area Systems: Enter your user code. If the system is in alarm the keypad will display DISARM SILENCE. Press
the Select key under DISARM.
Important: Disarming during an alarm sends an Abort report to the central station if your system is programmed
to send Abort reports! Be sure you want the alarm message cancelled before disarming during an alarm.
ALARM SILENCE
To silence the alarm while the bell or siren is sounding, enter your code number, press the COMMAND key,
and press the Select key under SILENCE. This silences the alarm but does not cancel any alarm reports to the
central station. Silencing an alarm while the bell is sounding sends an Abort report to the central station if your
system is programmed to send Abort reports.
RESETTING DETECTORS
To reset a smoke or other detector, enter the User Menu by pressing the COMMAND key until MENU? NO YES
appears in the display. Press the top row key under YES. The display shows ENTER CODE: -. Enter your code
number and press COMMAND. The keypad display now shows SENSOR RESET? Press any top row key.
TROUBLE CONDITION
When a device is in a trouble condition, the keypad tones and displays the zone or device name followed by
TRBL. Press any top row key to silence.
SYSTEM TESTING
You should test the security system periodically to ensure proper operation. You can do this through a function
in the User Menu. After entering the User Menu, press the COMMAND key until SYSTEM TEST? displays. Press any
top row key to test the system bell, battery, and communication to the central station receiver.
ALARM SERVICE
If service is required for this system, please contact:
Company _______________________________________________________________
Address_________________________________________________________________
Telephone ______________________________________________________________
The operating instructions above should be attached to the front, or framed
and located adjacent to the panel or a keypad with an alphanumeric display.
Listings and Approvals
Underwriters Laboratories (UL) Listed
UL 365 Police Connected Burglar
UL 609 Local Burglar
UL 1023 Household Burglar
UL 1076 Proprietary Burglar
UL 1610 Central Station Burglar
UL 985 Household Fire Warning
UL High Line Security with Model iCOMSL
California State Fire Marshal (CSFM)
FCC Part 15
FCC Part 68 Registration ID CCKUSA-18660-AL-R