Installation guide

XRSuper6/XR20/XR40 Installation Guide Digital Monitoring Products

TABLE OF CONTENTS

MODEL XRSuper6/XR20/XR40

COMMAND PROCESSOR

INSTALLATION GUIDE

FCC NOTICE

This equipment generates and uses radio frequency energy and, if not installed and used properly in

strict accordance with the manufacturer’s instructions, may cause interference with radio and television

reception. It has been type tested and found to comply with the limits for a Class B computing device

in accordance with the specication in Subpart J of Part 15 of FCC Rules, which are designed to provide

reasonable protection against such interference in a residential installation. If this equipment does cause

interference to radio or television reception, which can be determined by turning the equipment off and on,

the installer is encouraged to try to correct the interference by one or more of the following measures:

Reorient the receiving antenna

Relocate the computer with respect to the receiver

Move the computer away from the receiver

Plug the compute into a different outlet so that computer and receiver are on different branch circuits

If necessary, the installer should consult the dealer or an experienced radio/television technician

for additional suggestions. The installer may nd the following booklet, prepared by the Federal

Communications Commission, helpful:

“How to identify and Resolve Radio-TV Interference Problems.”

This booklet is available from the U.S. Government Printing Ofce, Washington D.C. 20402

Stock No. 004-000-00345-4

Information furnished by DMP is believed to be accurate and reliable.

This information is subject to change without notice.