Installation guide
Digital Monitoring Products XRSuper6/XR20/XR40 Installation Guide
4
INTRODUCTION
XRSuper6/XR20/XR40 Installation Guide Digital Monitoring Products
5
INSTALLATION
Installation
4.1 Mounting the Enclosure
The metal enclosure must be mounted in a secure, dry place to protect the panel from damage due to
tampering or the elements. It is not necessary to remove the PCB when installing the enclosure. The
PCB may be installed in the standard 340 enclosure or the optional 349 enclosure. The panels can also be
installed in the 341 or 342 small enclosure. The XRSuper6, XR20, or XR40 panels may optionally be installed
in the 350A Grade A enclosure.
Note: When using the Model 341 or 342 enclosure for UL Listed applications, use the Model 350, 349, 341,
342, or 352S enclosure for standby batteries.
Figure 2: Standard 340 Enclosure (left) or Optional 349 Enclosure (right)
Figure 3: Optional 341 (left) or 342 (right) Enclosure