User`s guide

25
User Menu
Arming and Disarming Event Displays
This displays any arming or disarming of system areas.
16-Character Display Description
ARM 3 12 1017 Area 3 has been armed by user 12.
Press the
left Select key for the area
name. Press the
right Select key for the
time the arming occurred.
32-Character Display Description
ARM 5:10P 10/ 17 The Perimeter was armed at 5:10 PM.
PERIMETER Press any Select key to display the area
number and user number.
Arming Event Types - There are 2 event type you may see here:
ARM - User armed the system DIS - User disarmed the system
User Checkin Event Displays
This shows when a user selected the pager Checkin feature from
the User Menu. See page 13 for more information.
16-Character Display Description
CHECKIN 16 1017 User 16 selected the Checkin feature on
Oct. 17. Press the
right Select key for the
Checkin time.
32-Character Display Description
MSG 3: 31P 10 / 17 User 16 selected the Checkin feature
CHECKIN USER: 16 at 3:31 PM on Oct.17.
Zone Event Displays
This section displays alarms, troubles, and other events that could
occur on your protection zones.
16-Character Display Description
2 BURG ALR 1017 A burglary alarm occurred on zone 2.
Press the
right Select key for the time the
alarm occurred.
32-Character Display Description
ALR 10: 23P 10/17 An alarm occurred at 10:23 PM on Oct.
17. 17.
BASEMENT DOOR Press any Select key to see the zone
number and zone type.
Zone Type - There are 7 possible zone types you may see here.
FIRE - Fire PANC - Panic BURG - Burglary
EMRG - Emergency SUPV - Supervisory
AUX1 - Auxiliary 1 AUX2 - Auxiliary 2
Event Types - There are 7 event type you may see here:
ALR - Alarm TBL - Trouble RST - Restore
LOW - Low battery MIS - Missing transmitter
FLT - Zone Fault SVC - Service Smoke Detector
Note: LOW and MIS are for wireless systems only.