User`s guide

XR200-485 Introduction 1
About Your Security System
The Security Command system has been designed with your safety
and comfort in mind. It uses the latest in computer based technology
to create the most advanced, user friendly security, fire, and access
control system available.
The Security Command system combines ease of use with a simple
to understand Security Command keypad to offer the full range of
features requested by today’s security system owners.
Use the Security Command system to turn portions of your protection
on or off by pressing a few keys, or have the system turn on or off
automatically by entering a simple schedule. You can add, delete,
and change personal user codes at any time or check the status of
protection devices in the system.
Parts of the System
There are two main parts to the Security Command system, the
Security Command keypad and the keypad User Menu.
Security Command Keypad
This is the device we have placed at certain locations throughout the
premises that allow you to turn the system’s protection on and off
using your personal user code.
Keypad User Menu
The keypad provides a simple User Menu containing all of the
functions you need to fully operate your system such as changing the
time of day or a personal user code.
A Note About False Alarms
One of the most important concerns facing the security industry
today is false alarms. The accidental dispatching of police and fire
agencies places others in jeopardy by limiting the response capability
of those emergency service units. We take this concern seriously and
have spent many hours training our employees to recognize the
causes of false alarms and prevent them from occurring.
As part of our commitment to reducing false alarms, we would like
to encourage you to read this guide thoroughly. All the information
contained here can help you quickly, and comfortably, learn the
operation of the Security Command system. If you have any
additional questions, or feel that you need more training, please do
not hesitate to contact us.
Test Your System Weekly
It is recommended that you test the burglary portion of your system
at least once each week. Testing should involve an active test of all
doors, windows, and motion detectors connected to your system. If
your system also has fire protection, call the service department to
find out how this portion of your system should be tested.
Refer to the System Test section of this guide for instructions on
testing the burglary portion of your system and refer to the Fire Drill
section for instructions on testing your system fire bells.
Introduction