Programming instructions

22
XR200 Programming Guide
2841 E. Industrial Drive Springfield, MO 65802-6310 800-641-4282
12.9 ANY BYPASS
When YES is selected, zones can be bypassed without a code number during the arming
sequence. A code number is always required to use the Bypass Zones option from the menu.
12.10 AREA SCHEDULES
Select YES to allow each area in this partition to set its own permanent and temporary, or
primary and secondary user disarming schedules. Enter NO to provide one set of user
disarming schedules for each partition.
12.11 PRIMARY/SECONDARY SCHEDULES
Select YES to provide primary and secondary schedules for this partition or each area within
this partition depending on the Area Schedules option selected in section 12.10. Enter NO to
use permanent and temporary schedules.
Choosing Schedules
Primary and Secondary schedules are ideal for auto arming and disarming of individual areas
and for creating Opening/Closing windows during which users with a level 1 or 2 authority
can disarm the system. Having two separate schedules allows you to create two Opening/
Closing windows for each day. One could be for normal business activity and the other could
be for cleaning crews or a second shift. Once programmed, these schedules operate
continually until changed.
Permanent schedules are identical to Primary and Secondary schedules and can be used for
the same purposes. Temporary schedules however, once programmed, expire at the end of
their closing time and must be programmed again. This feature allows you to create a
temporary schedule that lets a delivery or repairman disarm and occupy an area for a
specified time without the schedule occurring again.
12.12 AREA NUMBER
Enter the number of the area in this partition you are programming. In an area system,
partition 1 can have up to 8 areas. Partitions 2 to 4 can each have up to 4 areas. After
entering the area number, press COMMAND to enter the area name.
12.13 AREA NAME
The area name can be up to 16 alphanumeric characters. All others are marked unused. For
instructions on entering alphanumeric characters, refer to section 1.7. To add an area name
to the system, press any SELECT key and then enter up to 16 characters for the new area
name. Press COMMAND to continue.
To mark an active area unused, delete the old name by pressing a top row SELECT key,
then press the COMMAND key. The programmer automatically programs the name as
*UNUSED*. If you have already cleared Area Information during Initialization, all areas will be
marked * UNUSED *. See section 2.6.
12.14 ACCOUNT NUMBER
Enter the account number to be sent to the receiver for this area. Choose an account number
compatible with the Communication Type selected in section 3.2. The default account
number is the one previously entered in section 3.4. If the Communication Type selected in
section 3.2 is multiplex, you must choose an account number between 128 and 999.
Below illustrates proper assignment of multiplex account numbers to DMP SCS-1 Receivers:
Receiver Line Main Account # Area Account #
1 10000 to 10127 10128 to 10999
2 20000 to 20127 20128 to 20999
3 30000 to 30127 30128 to 30999
4 40000 to 40127 40128 to 40999
5 50000 to 50127 50128 to 50999
12 - AREA INFORMATION
* UNUSED *
ANY BYPS NO
AREA SCH NO
PRI/SEC NO
AREA NO: –
ACCOUNT NO: 12345