Programming instructions

19
2841 E. Industrial Drive Springfield, MO 65802-6310 800-641-4282
XR200 Programming Guide
10.4 FIRE ZONES
Specifies the addresses where all fire zone alarms and troubles are displayed. The zone
name is displayed and, if it's a trouble condition, the keypad steady trouble buzzer sounds.
The buzzer remains on until any top row SELECT key is pressed. The name remains in the
list until the user clears it with the Sensor Reset function.
When using the 690, 693, 790, 791, or 793 Security Command LCD Keypads, the XR200
provides distinct speaker tones from the keypad for Fire. See below:
Fire On - Fire zone alarm and Bell Output or Fire Bell Output is ON.
Off - Alarm Silence.
10.5 BURGLARY ZONES
Specifies the addresses where all burglary zone alarms and troubles are displayed. Burglary
zones include Night, Day, and Exit type zones. Burglary zone troubles remain in the list until
the zone restores.
For zone alarms, only the last burglary zone tripped remains in the list. The alarm remains in
the list until another burglary zone goes into alarm, any area of the system is disarmed, or 10
minutes elapses without an alarm. This ensures that if a burglary is in progress the last zone
tripped remains in the list even if the zone has been restored.
The keypad buzzer sounds for one second on burglary alarms.
When using the 690, 693, 790, 791, or 793 Security Command LCD Keypads, the XR200
provides distinct speaker tones from the keypad for Burglary. See below:
Burglary On - Burglary zone alarm and Bell Output or Burglary Bell Output is ON.
Off - Alarm Silence.
10.6 SUPERVISORY ZONES
Specifies the addresses where all supervisory zone alarms and troubles are displayed.
Supervisory zones are entered in the status list and sound the keypad buzzer until a valid
user code is entered at any keypad address.
10.7 PANIC ZONES
Specifies the addresses where all panic zone alarms and troubles are displayed. The name
of the zone remains in the list until the zone restores. The keypad buzzer does not sound for
panic alarms or troubles.
10.8 EMERGENCY ZONES
Specifies the addresses where all emergency zone alarms and troubles are displayed. The
name of the zone remains in the list until the zone restores. The keypad buzzer does not
sound for emergency alarms or troubles.
10.9 AUXILIARY 1 ZONES
Specifies the addresses where all Auxiliary 1 zone alarms and troubles are displayed. The
name of the zone remains in the list until the zone restores. The keypad buzzer does not
sound for Auxiliary 1 alarms or troubles.
10.10 AUXILIARY 2 ZONES
Specifies the addresses where all Auxiliary 2 zone alarms and troubles are displayed. The
name of the zone remains in the list until the zone restores. The keypad buzzer does not
sound for Auxiliary 2 alarms or troubles.
10 - STATUS LIST
FIRE 12345678
SPRVSRY 12345678
AUX 1 - - - - - - - -
EMERGCY- - - - - - - -
AUX 2 - - - - - - - -
BURGLRY 12345678
PANIC - - - - - - - -