Programming instructions

18
XR200 Programming Guide
2841 E. Industrial Drive Springfield, MO 65802-6310 800-641-4282
9.1 MENU DISPLAY
Menu Display allows you to select at which keypad addresses the user can access the
following functions.
A description of each menu option follows:
9.2 ARMED STATUS
Enter the keypad addresses that show the armed areas for their partitions. For example: if
address 1 is enabled here, it can display the armed areas within its partition. Each armed
area is displayed with its area number. The User Menu Armed Areas function also displays
the custom area name you enter in the Area Information section of the Programmer.
9.3 TIME
Enter the keypad addresses that can display the time and day of the week.
9.4 ARM/DISARM
Enter the keypad addresses from which users can arm and disarm areas in a partition.
10.1 STATUS LIST
This function allows you to select the zone alarms and troubles, and system monitor troubles
displayed at the keypads. The Status List function operates automatically when the keypad is
not performing any other function.
The keypad stays in the Status List until the user chooses to go to system arming/disarming
or a menu option. Status List alternates with the Armed Status on keypad addresses selected
in section 9.2. You can choose to have System Monitor troubles placed in the list, the
different zone types placed in the list, and at which keypad addresses they'll display.
A description of how each is displayed in the Status List follows:
10.2 DISPLAY KEYPADS
This option defines which keypad addresses display the various status information. Any
combination of addresses can be entered to display the status items that follow. If you don't
want a particular status item to display, do not enter any addresses.
10.3 SYSTEM MONITOR TROUBLES
Specifies the addresses where any trouble on a System Monitor is displayed. The System
Monitors are:
AC Power
Battery Power
Panel Box Tamper
Phone Line 1
Phone Line 2 (requires the 893 or 893A Dual Phone Line Module)
The name of the System Monitor is placed in the Status List and the keypad steady trouble
buzzer sounds. The buzzer remains on until any top row SELECT key is pressed on the
keypad. The name remains in the list until the condition is restored.
9 - MENU DISPLAY
10 - STATUS LIST
MENU DISPLAY
STATUS LIST
SYS TRB 12345678
DISPLAY KEYPADS:
ARM STAT 12345678
TIME DSP 12345678
ARM/DIS 12345678