User`s guide

29
29
About the Display Events Section
This section of the user’s guide shows the User's Guide Display
Events items for both 16-character (single line) and 32-character
keypad displays. While in the Display Events function, use the
COMMAND and ARROW keys to go forward or backward through
the list of events.
Arming and Disarming Event Displays
This displays any arming or disarming of system areas.
16-Character Display Description
ARM 3 12 1017 Area 3 was armed by user 12 on Oct. 17.
Press the SELECT key under 3 for the
area name, under 12 for the user name,
or under 1017 for the time the arming
occurred.
32-Character Display Description
ARM 5:10P 10 / 17 The Perimeter was armed at 5:10
PM.
PERIMETER Press any Select key to display the area
number and user number then any Select
key to display the user name.
Arming Event Types - There are 2 event type you may see here:
ARM - User armed the system DIS - User disarmed the system
Zone Event Displays
This section displays alarms, troubles, and other events that could
occur on your protection zones.
16-Character Display Description
2 BURG ALR 1017 A burglary alarm occurred on zone 2.
Press the
right SELECT key for the time
the alarm occurred.
32-Character Display Description
ALR 10: 23P 10/17 An alarm occurred at 10:23
PM on Oct. 17.
BASEMENT DOOR Press any SELECT key to see the zone
number and zone type.
Zone Type - There are 7 possible zone types you may see here.
FIRE - Fire PANC - Panic BURG - Burglary
EMRG - Emergency SUPV - Supervisory
AUX1 - Auxiliary 1 AUX2 - Auxiliary 2
Event Types - There are 6 event types you may see here:
ALR - Alarm TBL - Trouble RST - Restore
LOW - Low battery MIS - Missing wireless transmitter
Note: LOW and MIS are for wireless systems only.
User Menu
User Menu
Zone Event Displays
This section displays alarms, troubles, and other events that could
occur on your protection zones.
16-Character Display Description
2 BURG ALR 1017 A burglary alarm occurred on zone 2.
Press the
right Select key for the time the
alarm occurred.
32-Character Display Description
ALR 10: 23P 10/17 An alarm occurred at 10:23
PM on Oct. 17.
BASEMENT DOOR Press any Select key to see the zone
number and zone type.
Zone Type - There are 7 possible zone types you may see here.
FIRE - Fire PANC - Panic BURG - Burglary
EMRG - Emergency SUPV - Supervisory
AUX1 - Auxiliary 1 AUX2 - Auxiliary 2
Event Types - There are 6 event type you may see here:
ALR - Alarm TBL - Trouble RST - Restore
LOW - Low battery MIS - Missing wireless transmitter
Note: LOW and MIS are for wireless systems only.
About the Display Events Section
This section of the user’s guide shows the User's Guide Display
Events items for both 16-character (single line) and 32-character
keypad displays. While in the Display Events function, use the
COMMAND and ARROW keys to go forward or backward through
the list of events.
Arming and Disarming Event Displays
This displays any arming or disarming of system areas.
16-Character Display Description
ARM 3 12 1017 Area 3 was armed by user 12 on Oct. 17.
Press the Select key under 3 for the
area name, under 12 for the user name,
or under 1017 for the time the arming
occurred.
32-Character Display Description
ARM 5:10P 10/ 17 The Perimeter was armed at 5:10
PM.
PERIMETER Press any Select key to display the area
number and user number then any
Select key to display the user name.
Arming Event Types - There are 2 event type you may see here:
ARM - User armed the system DIS - User disarmed the system