User`s guide

42
42
The relay activates momentarily during which you must open the
door.Once you open the door, you have 30 seconds to exit and
close the door before the zone 2 Soft-Shunt expires.
Easy Entry™ User's Guide
DOOR STRIKE
From the Status List, present your card to the reader. Once it is
validated by the system, the Door Strike relay activates. If you are
entering an armed area which you are assigned, accessing the area
will automatically cause it to be disarmed.
Select NO to arm or disarm individual areas. Select YES, or simply wait, and the keypad will
automatically arm or disarm all areas forwhich you are authorized.
ARMING AND DISARMING AN AREA SYSTEM
Press Command. The keypad displays ARM DISARM.
Press the Select key under either option. The keypad
displays ENTER CODE: -. Present your card to the reader.
Once it is validated by the system, all areas accessible by
you arm or disarm automatically.
Appendix
Appendix
The relay activates momentarily during which you must open the
door. Once you open the door, you have 30 seconds to exit and
close the door before the zone 2 Soft-Shunt expires.
Select NO to arm or disarm individual areas. Select YES, or simply wait, and the keypad will
automatically arm or disarm all areas for which you are authorized.
ABC SECURITY
FRI 2:51 AM
POWER
While the keypad is in the Status List, present
your access card.
ABC SECURITY
ARM DISARM
ABC SECURITY
ENTER CODE: –
ABC SECURITY
ALL? NO YES
POWER POWER POWER
ABC SECURITY
FRI 2:51 AM
POWER
While the keypad is in the Status List, present
your access card.
DISARMING WITH ENTRY DELAY
Once the protected door is opened and the entry delay starts, the
keypad displays ENTER CODE: -. Present your card to the reader
and, once it is validated, the system disarms all areas accessible by
you. Area systems provide a delay to allow selected areas only to be
disarmed. See Arming and Disarming above.
Using the access reader for user menu access
You can also use a card reader to access the User Menu when the
MENU? NO YES display is shown and a code is requested.
POWER
ABC SECURITY
ENTER CODE: -
Access door is
opened.
POWER
The system disarms the areas. Area systems allow a delay
for you to select only certain areas. See Arming and Disarming.
Easy Entry™ User's Guide
DOOR STRIKE
From the Status List, present your card to the reader. Once it is validated
by the system, the Door Strike relay activates. If you are entering an armed
area which you are assigned, accessing the area will automatically cause
it to be disarmed.
DISARMING WITH ENTRY DELAY
Once the protected door is opened and the entry delay starts, the
keypad displays ENTER CODE: -. Present your card to the reader
and, once it is validated, the system disarms all areas accessible by
you. Area systems provide a delay to allow selected areas only to be
disarmed. See Arming and Disarming above.
Using the access reader for user menu access
You can also use a card reader to access the User Menu when the
MENU? NO YES display is shown and a code is requested.
ARMING AND DISARMING AN AREA SYSTEM
Press Command. The keypad displays ARM DISARM.
Press the Select key under either option. The keypad
displays ENTER CODE: -. Present your card to the reader.
Once it is validated by the system, all areas accessible by
you arm or disarm automatically.
POWER
ABC SECURITY
ENTER CODE: -
Access door is
opened.
POWER
The system disarms the areas. Area systems allow a delay for
you to select only certain areas. See Arming and Disarming.
ABC SECURITY
ARM DISARM
ABC SECURITY
ENTER CODE: –
ABC SECURITY
ALL? NO YES
POWER POWER POWER