Programming instructions

Digital Monitoring Products XR200-485 Programming Guide
28
PRINTER REPORTS
XR200-485 Programming Guide Digital Monitoring Products
29
HOST LOG REPORTS
Printer Reports
12.1
PRINTER REPORTS
Printer Reports
This section allows you to dene the operation of a local printer connected to the
panel through the use of a DMP 462P Printer Interface Card. The 462P allows you to
connect the DMP SCS-PTR or other compatible 40-character or 80-character serial
printer to the panel.
Printing the panel event buffer
The Display Events option in the User Menu contains a PRINT command that allows
the user to send the contents of the panel event buffer to a local printer. The PRINT
option is visible whether or not a 462P Printer Interface Card is attached to the
panel.
12.2
ARM/DIS NO YES
Arm and Disarm Reports
Prints arming, disarming, and Late to Close reports. Includes the area number,
name, and action (armed, disarmed, or late), the user number, user name, and time
and date.
12.3
ZONE NO YES
Zone Reports
Prints changes in the status of active zones. Includes the zone number, name, and
type as well as the action (alarm, trouble, bypass, etc.) user number (if applicable)
and area name. When the Walk Test or Panic Zone Test (485B only) is performed,
Verify and Fail messages also print for each zone.
12.4
USR CMDS NO YES
User Command Reports
Prints user code changes, outputs turned ON or OFF (if operated by a schedule, SCH
is shown in Display Events in place of the user number), schedule changes, and User
Menu functions.
12.5
DOOR ACS NO YES
Door Access Reports
Prints door access activity. Includes the door number, rst and second (485B only)
user number, rst and second (485B only) user name, and the time and date of the
door access.
12.6
SUPV MSG NO YES
Supervisory Reports
Prints System Monitor Troubles and system events. See Status List - System Monitor
Troubles.