Programming instructions

Digital Monitoring Products XR200-485 Programming Guide
26
STATUS LIST
XR200-485 Programming Guide Digital Monitoring Products
27
STATUS LIST
11.5
BURGLRY 12345678
Burglary Zones
Species the addresses where all burglary zone alarms and troubles display. Burglary
zones include Night, Day, and Exit type zones. Burglary zone troubles remain in the
list until the zone restores. All keypads are selected by default.
For zone alarms, only the last burglary zone tripped remains in the list. The alarm
remains in the list until another burglary zone goes into alarm, any area of the
system is disarmed, or 10 minutes elapses without an alarm. This ensures that if a
burglary is in progress the last zone tripped remains in the list even if the zone is
restored.
The keypad buzzer sounds for one second on burglary alarms.
When using the Security Command LCD Keypads or the 630F Remote Fire Command
Center, the panel provides distinct speaker tones from the keypad for Burglary:
On - Burglary zone alarm and Bell Output or Burglary Bell Output is ON.
Off - Alarm Silence.
11.6
SPRVSRY 12345678
Supervisory Zones
Species the addresses where all supervisory zone alarms and troubles display. Enter
supervisory zones in the status list and sound the keypad buzzer until a valid user
code is entered at any keypad address.
11.7
PANIC - - - - - - - -
Panic Zones
Species the addresses where all panic zone alarms and troubles display. The zone
name remains in the list until the zone restores. The keypad buzzer does not sound
for panic alarms or troubles.
11.8
EMERGCY - - - - - - - -
Emergency Zones
Species the addresses where all emergency zone alarms and troubles display. The
zone name remains in the list until the zone restores. The keypad buzzer does not
sound for emergency alarms or troubles.
11.9
AUX 1 - - - - - - - -
Auxiliary 1 Zones
Species the addresses where all Auxiliary 1 zone alarms and troubles display. The
zone name remains in the list until the zone restores. The keypad buzzer does not
sound for Auxiliary 1 alarms or troubles.
11.10
AUX 2 - - - - - - - -
Auxiliary 2 Zones
Species the addresses where all Auxiliary 2 zone alarms and troubles display. The
zone name remains in the list until the zone restores. The keypad buzzer does not
sound for Auxiliary 2 alarms or troubles.