Programming instructions

Digital Monitoring Products XR200-485 Programming Guide
10
COMMUNICATION
XR200-485 Programming Guide Digital Monitoring Products
11
COMMUNICATION
3.8
DFR TEST NO YES
Defer Test Time
Select YES to allow the programmed test report to be deferred if the panel
communicates with a receiver within the time set in Test Frequency. Select NO to
send the test report as programmed regardless of previous panel communication.
3.9
TEST FREQ: 0
Test Frequency
Allows you to set how often the panel sends a test report to the SCS-1/SCS-1R
Receiver. Enter from 1 to 60 days. This prompt is not displayed if Defer Test Time is
NO.
3.10
0:00 AM PM
TEST DAY: ALL
TEST TIME
Test Time
Press COMMAND to show the enter test time display. Enter the time of day the panel
sends the test report to the SCS-1/SCS-1R Receiver. Use entries between 12:00 to
11:59 and then choose AM or PM. When Defer Test Time is set to NO, this option
allows you to program the day of the week the test report is sent. Choose one day
of the week or all days.