User`s guide

XR500 User’s Guide 3Introduction
COMMAND key
The COMMAND key allows you to advance through the keypad
displays or User Menu or complete a data entry function.
Back Arrow key
The Back Arrow key is used to go back through the keypad displays
while operating your system. You can press the Back Arrow key to
back up through the list of functions in the User Menu or to erase
the last character you entered.
POWER LED
This LED remains on steady as long as your system is connected to
its AC power supply. Should there be an interruption, the LED turns
off and the system backup battery maintains normal operation for
a time so you can contact the service department.
ARMED LED
This LED is ON steady anytime a burglary protection area is armed
and is OFF when ALL areas are disarmed.
2-Button Panic Keys
Your keypad may be set up to send a Panic, Emergency, or Fire
report to the central station. This function is optional. An
icon label should appear above the Select keys if this option is
programmed for your keypad.
To send a panic, press and hold the two Select keys for 2 seconds,
until a beep from the keypad is heard.
Top Row Select Keys
Label shows
icons only
Police Emer
g
enc
y
Fire
The Security Command Keypad
Your system may have one or more easy to use Security Command
keypads that allow you to properly operate the system.
The Select keys
There are four keys under the display called the Select keys. These
keys are one of the features that make your system so easy to
operate. They allow you to make selections by pressing the Select
key under a choice shown in the display.
For the purposes of this guide, when instructed to press the Þ rst
Select key, press the far left Select key; the second Select key is
the second from the left; third Select key is second from the right;
and the fourth Select key is the far right key.
A BC D E F G H I J KL
VWX M N O P Q R S TU
Y Z
COMMAND
90
1234
56
7
8
R
ABC PRINTING
FR I 2 : 51 AM
ARMED
32-Character LCD Display
Armed LED
Power LED
Select Keys
Digit keys for Data Entry
COMMAND Key
Back Arrow Key
Speaker
Data Entry keys
These keys allow you to enter your user code when arming or
disarming or enter other information into the system.