User`s guide

50 XR500 User’s Guide Appendix C
Easy Entry™ User’s Guide
DOOR STRIKE
From the Status List, present your card to the reader. Once validated by the system, the Door
Strike relay activates. If you are entering an armed area to which you are assigned, accessing
the area automatically causes it to be disarmed.
While the keypad is in the Status List, present your access card. The relay activates momentarily
during which you must open the door. Once you open the door, you have 30 seconds to exit and
close the door before the zone 2 Soft-Shunt expires and triggers an alarm.
ARMING AND DISARMING AN AREA SYSTEM
Press Command. The keypad displays ARM DISARM. Press the
Select key under either option. The keypad displays ENTER CODE-.
Present your card to the reader. Once validated by the system, all
areas accessible by you arm or disarm automatically. Select NO to
arm or disarm individual areas. Select YES, or simply wait, and the
keypad automatically arms or disarms all areas for which you are
authorized.
DISARMING WITH ENTRY DELAY
Once the protected door is opened and the entry delay starts, the keypad displays
ENTER CODE: -. Present your card to the reader. Once validated, the system disarms
all areas accessible by you. Area systems provide a delay to allow you to disarm
selected areas only. See Arming and Disarming above.
Using the access reader for user menu access
You can also use a card reader to access the User Menu. When the MENU? NO YES
displays, enter a code when requested.
ABC SECURITY
ARM DISARM
POWER
While the keypad is in the Status
List, present your access card.
The relay activates for 5 seconds during
which time you can open the door.
Once you open the door, you have 40
seconds to exit and close the door before
the zone 2 Soft-Shunt ex
p
ires.
ABC SECURITY
ARM DISARM
ABC SECURITY
ENTER CODE: –
ABC SECURITY
ALL? NO YES
POWER POWER POWER
ABC SECURITY
ENTER CODE: -
POWER
Access door is opened.
The system disarms the areas and activates the Door Strike Relay.
POWER
Appendix C