User`s guide

46 XR500 User’s Guide Appendix B
Zone Status Browser
ZONE STATUS?
ARM BYPS ALR NBR
ZONE NO: -
SELECT ZONE . . .
COMMAN
D
Access the User Menu. Press
COMMAND until ZONE
STATUS appears.
Press any SELECT key then
press the SELECT key under
NBR.
SELECT AREA . . .
COMMAN
D
FRONT OFFICE
COMMAN
D
24 HOUR ZONES
COMMAN
D
Press one of the left two
SELECT keys to browse
through the names of zones.
When the area where the zone is
located is displayed, press any
SELECT key.
This prompt allows you to search
for a zone by area. Press the
COMMAND key to scroll through
the list of areas.
After all the areas are
displayed, the system allows
you to search through the 24
hour zones (Fire, Panic,
Supervisory, etc.).
Press the COMMAND key to scroll
through the list of all zone names.
EAST DOOR
When the correct zone name is
displayed, press any SELECT key.
ZONE NO : 0 1 2
Verify the zone number matches
the previously shown name.
COMMAN
D
COMMAN
D
EAST DOOR - OKAY
The system displays one of these
zone status messages:
-OKAY = the zone is normal
-BYPAS = the zone is bypassed
-BAD O = the zone is open
-BAD S = the zone is shorted
Press COMMAND.
SELECT ZONE . . .
COMMAN
D
HALL SMOKE
ZONE NO : 0 3 4
COMMAND
COMMAND
HALL SMOKE - OKAY
Press COMMAND.
When the correct zone name is
displayed, press any SELECT key.
Verify the zone number matches
the previously shown name.
Pressing COMMAND
allows you to enter
another zone number.
The system displays one of these
zone status messages:
-OKAY = the zone is normal
-BYPAS = the zone is bypassed
-BAD O = the zone is open
-BAD S = the zone is shorted
Bypass Zones Browser
BYPASS ZONES?
ZONE: - RST BYP
SELECT ZONE . . .
COMMAN
D
Access the User Menu. Press
COMMAND until BYPASS ZONES
appears. Press any SELECT key.
Press either of the two left SELECT
keys.
SELECT AREA . . .
COMMAN
D
FRONT OFFICE
When the area where the zone is
located is displayed, press any SELECT
key.
This prompt allows you to search for a
zone by area. Press the COMMAND
key to scroll through the list of areas.
Press the COMMAND key to scroll
through the list of all zone names.
EAST DOOR
When the correct zone name is
displayed, press any SELECT key.
ZONE:012 RST BYP
The display shows the zone number.
Press the SELECT key under RST to
Reset the zone. Press the SELECT key
under BYP to Bypass the zone.
ZONE: - RST BYP
The display returns to the ZONE:
prompt allowing you to enter
another zone number.
Appendix B