User`s guide

42 XR500 User’s Guide Appendix A
About the Display Events Section
This section of the User’s Guide shows the Display Events items for
32-character keypad displays. While in the Display Events function,
use the COMMAND and Back Arrow keys to go forward or backward
through the list of events.
To view more information about each display, press the Select key
as directed in the explanations below.
Arming and Disarming Event Displays
This displays any system area arming or disarming events.
32-Character Display Description
ARM 5:10P 10/ 17
WAREHOUSE
The area was armed at 5:10
PM. Press any Select key to
display the area number and
user number, and then any
Select key to display the user
name.
Arming Event Types - There are two event types you may see
here:
ARM - User armed the system
DIS - User disarmed the system
Zone Event Displays
This displays alarms, troubles, and other events that may occur on
your protection zones.
32-Character Display Description
ALR 10:23P 10/17
BASEMENT DOOR
An alarm occurred at 10:23 PM
on Oct. 17. Press any Select
key to see the zone number
and zone type.
Zone Type - There are seven possible zone types you may see
here.
FIRE - Fire
PANC - Panic
BURG - Burglary
EMRG - Emergency
SUPV - Supervisory
AUX1 - Auxiliary 1
AUX2 - Auxiliary 2
Event Types - There are seven event type you may see here:
ALR - Alarm
TBL - Trouble
RST - Restore
LOW - Low battery
MIS - Missing wireless transmitter
FLT - Zone Fault
SVC - Service smoke detector
Note: LOW and MIS are for wireless systems only.
Appendix A