User`s guide

26 XR500 User’s Guide User Menu
Forgive Failure to Exit
Failure to Exit is an Anti-pass back violation in which a user assigned
with anti-pass back has attempted to re-enter an area that they
did not exit through.
Forgive Failure to Exit removes the anti-pass back violation. See
page 6 for more information about anti-pass back.
1. After the USER CODES? menu is accessed and
ADD DEL CHG BAT displays, press COMMAND. The keypad
displays FRGV.
2. Press the top left key. The display changes to USER
NUMBER:
3. At the USER NUMBER:- prompt, enter the user number to
be forgiven and press COMMAND. The User Code Browser
described in the Appendix can help Þ nd the appropriate
user by name if you do not know the number.
To clear the FAILURE TO EXIT (Anti-pass back) violation for
all users enter 000 at the USER NUMBER:- prompt.
4. The keypad displays USER XXXX FORGVN to conÞ rm, then
returns to step 3 for the next user. Press the Back Arrow key
to exit this menu.
Ambush Codes
Your system may be programmed to allow user number 1 to be used
as an Ambush code. This Ambush code functions identically to a
standard code with the exception that it sends a silent alarm to the
central station. This silent alarm alerts the operator to a duress
situation at the premises and prompts immediate notiÞ cation of
authorities.
Refer to the System Setup section of this guide to see if your system
is programmed for Ambush. If so, do NOT program a code for user
number 1 unless you intend to use the Ambush function.