User`s guide

XR500 User’s Guide 11Arming and Disarming
System Disarming Operation
While the system is armed, you can only enter the premises through
an entry/exit delay door without causing an alarm. After opening
the door, the Security Command keypad sounds a prewarn tone
to remind you to disarm the system. (See Door Access Disarming
below.) You must disarm the system before the entry delay time
expires or an alarm on the door zone occurs.
During the entry delay time, the keypad displays ENTER CODE:.
Enter your code to disarm the system. Only those areas assigned
to your code disarms.
When you present your card to an outside reader to gain access and
your code has authority to disarm, those areas assigned to the door
which match areas assigned to your code automatically disarm.
Enter code does not display.
Schedules: If you have programmed schedules for your system
and a code is entered outside of a schedule and that code does
not have authorization to disarm outside of schedules, the keypad
displays INVALID TIME. This lets users know that they are disarming
outside of their authorized time. If your system is monitored, an
Unauthorized Entry report is sent to the central station.
All or Selective Disarming: After entering your user code, the
system allows you to disarm either all of the areas to which you
have access or just selected areas. If you choose to disarm all
areas, the system automatically disarms them. If you choose to
disarm selected areas, the area names display on the keypad.
Alarm Display: After disarming, the keypad dis plays any zones
that tripped or any transmission problems that occurred dur ing
the armed period. All burglary zones are then dis armed and any
by passed zones are automatically reset.
Disarmed Message: The keypad displays ALL SYSTEM OFF after the
system disarms.
Central Sta tion Report: A report of the system disarming can be
transmitted to the central sta tion. This is optional and can be
programmed for you at any time.
Door Access Disarming: Your system may be programmed to allow
area disarming when a card is presented to a door access reader
located outside of the building. Simply present your card to the
reader and after the card code is validated for the appropriate
authority, a door access is granted and your matching areas are
automatically disarmed. See the Easy Entry™ User’s Guide in
Appendix C.