User`s guide

Appendix E62 XR500/XR100 User’s Guide
Appendix E XR500/XR100 User’s Guide 63
Arming and Disarming an All/Perimeter System
Press COMMAND. The keypad displays PERIM ALL (when arming) or DISARM?. Press the Select key
under the desired option. The keypad displays ENTER CODE: -.
Present your card to the reader. Once the system validates the card, if you choose PERIM, only
the perimeter arms. If you choose ALL, both areas arm. If programmed on a 32-character
keypad, ALL may be automatically chosen for you after a short delay. Present your card to the
reader and all armed areas disarm automatically.
Arming and Disarming a Home/Sleep/Away System
Present your card to the reader. If the system is armed, once the system validates
the card, all areas are disarmed and the keypad displays ALL SYSTEM OFF.
If the system is disarmed when you present your card, once the system validates the
card, HOME SLEEP AWAY displays. You can manually press the Select key under the
desired option or after short time all areas may be automatically armed in the AWAY
mode.
Disarming with Entry Delay
All Systems - Once the protected door is opened and the entry
delay starts, the keypad displays ENTER CODE: - . Present your
card to the reader. Once validated, the system disarms all areas
accessible by you. Area systems provide a delay to allow selected
areas only to be disarmed. See Arming and Disarming above and
on the previous page.
Using the Access Reader for User Menu Access
You can also use a card reader to access the User Menu. When
MENU? NO YES displays, select YES and enter a code when
requested.
PERIM ALL
DISARM?
or
ABC SECURITY
ARM DISARM
ABC SECURITY
ENTER CODE: –