User`s guide

60 XR500/XR100 User’s Guide Appendix C
Appendix D
XR500/XR100 User’s Guide 61
Entering User Names
Refer to the following when entering names information into the
keypad.
-
Once you've cleared the default
name, the display shows a dash
on the display left side.
To enter a custom name into
the keypad, you use the
three rows of number keys.
To enter a custom name,
press the number key above
the letter you want to enter.
Under each number key are
three letters.
1 2 4
3
5 6
8
7
9 0
{
1
A B
C
1
A
B
C
1
2
Once the letter you want displays,
press the number key above the
next letter you want to enter.
You can enter up to 16 character
s
for each name into the keypad.
A
1 2 4
3
5 6 8
7
9 0
3
4
9
The nine and zero keys . .
.
Y
Z
(space)
Pressing the 9 key provides you
with Y, Z, and a space to use
between names. For example:
BOB SMITH.
0
–
.
Pressing the 0 (zero) key provides
you with a – (dash), . (period),
* (asterisk), and a # (pound sign).
*
#
With the number displayed, press
the SELECT key/area that matches
the letter position. See example.
CMD
CM
D
User Disarm and Entry
Use the following steps to disarm your system and silence an
alarm.
THU 1:29 PM
ARM DISARM
MENU? NO
YES
ENTER CODE: -
From the Status List, press
the COMMAND key.
Press the COMMAND key
again.
At the Menu prompt, press
the right SELECT key/area.
At the
ENTER CODE:
prompt,
enter your user code.
Press COMMAND.
ALARM SILENC E?
Once in the User Menu, the
first menu prompt appears.
Press any SELECT key/area to choose the option.
Press COMMAND to advance to the next prompt.
CMD
CMD
CMD
CMD
Appendix C