User`s guide
48  XR500/XR100 User’s Guide System Setup
  XR500/XR100 User’s Guide  49System Setup
Holiday Date Record 
Your system has up to 20 holiday dates available that supersede all 
regular scheduled times for that day.
#  Date (mm/dd)  HOL (circle one)
1.  _____/_____  A or B or C
2.  _____/_____  A or B or C
3.  _____/_____  A or B or C
4.  _____/_____  A or B or C
5.  _____/_____  A or B or C
6.  _____/_____  A or B or C
7.  _____/_____  A or B or C
8.  _____/_____  A or B or C
9.  _____/_____  A or B or C
10.  _____/_____  A or B or C
11.  _____/_____  A or B or C
12.  _____/_____  A or B or C
13.  _____/_____  A or B or C
14.  _____/_____  A or B or C
15.  _____/_____  A or B or C
16.  _____/_____  A or B or C
17.  _____/_____  A or B or C
18.  _____/_____  A or B or C
19.  _____/_____  A or B or C
20.  _____/_____  A or B or C
Output Record 
Your system has outputs that are used to control various functions 
within the building or access around its perimeter.  The list below 
identies the output numbers and device names.
Output #  Output Name
___________  _______________________________________
___________  _______________________________________
___________  _______________________________________
___________  _______________________________________
___________  _______________________________________
___________  _______________________________________
___________  _______________________________________
___________  _______________________________________
___________  _______________________________________
___________  _______________________________________
___________  _______________________________________
___________  _______________________________________
___________  _______________________________________
___________  _______________________________________
___________  _______________________________________
___________  _______________________________________
___________  _______________________________________
___________  _______________________________________
Use  the  Output  number  in  the  User  Menu  when  setting  Output 
Schedules or using the Outputs ON OFF option to manually toggle 
the relays.










