User`s guide

38 XR500/XR100 User’s Guide User Menu
XR500/XR100 User’s Guide 39User Menu
Setting Holiday ABC Schedules for S1, S2, S3, S4,
OUT, and DOOR Schedules
Three Holiday schedules are available for each shift (S1, S2, S3,
S4), each output relay (OUT), each door access relay (DOOR),
and through their respective menu options. This allows a shift,
output, or door to have three different schedules for holidays.
For example, Holiday Schedule A for those holidays when the
building stays closed, Holiday Schedule B for a day that only opens
for a morning, etc. Also, Holiday Schedules can be used to cross
multiple days. These schedules become active and supersede the
current day’s schedule when a Holiday Date occurs. See Setting
Holiday Dates (HOL).
1. After you have accessed the SCHEDULES? menu and the
schedule options, S1 S2 S3 S4, display, press the COMMAND
key until the display changes to SUN MON TUE WED. Press
the COMMAND key again to display THU FRI SAT HOL.
2. Select HOL to program holiday schedules.
3. The keypad displays HOL: A B C . Select A to set the rst of
three holiday schedules.
4. The keypad displays A - : AM PM.
Note: After Selecting the schedule, the keypad displays any
current times previously set for that holiday. This feature allows
you to review the programmed times.
5. If times display, the keypad then displays DELETE KEEP.
Select DELETE to enter new times.
6. The keypad then displays ON TIME? or OPENING TIME?. This
is followed by the display – : AM PM.
Enter a new time and select AM or PM.
The display changes to OFF TIME? or CLOSING TIME?. This is
followed by the display – : AM PM.
Enter a new time.
Enter all schedule times using a 12 hour clock. For example,
to enter 6 AM you would enter 0 + 6 + 0 + 0 select AM. For
11 PM you would enter 1 + 1 + 0 + 0 and select PM.
7. The keypad returns to HOL: A B C allowing you to enter a
B and/or C holiday schedule for the same Shift (S1, S2, S3,
or S4), Output or Door. Go back to step 3 to add additional
holiday schedules.