User`s guide

36 XR500/XR100 User’s Guide User Menu
XR500/XR100 User’s Guide 37User Menu
Setting Shift (S1 S2 S3 S4) Schedules
1. Access the User Menu and press COMMAND until SCHEDULES?
displays. Press any Select key.
2. The keypad displays S1 S2 S3 S4. Select the shift you
want to program. This allows you to enter a schedule that
remains in place until you change or delete it.
3. Your system may be programmed to allow four shift
schedules per area, if so, AREA NO:- displays. Enter the
area number that you want to assigning to this schedule.
Press the COMMAND key to accept your Selection and
continue setting schedules.
4. The keypad displays SUN MON TUE WED. Press the
COMMAND key to display THU FRI SAT HOL. Select the day
you want the schedule to begin. If you select HOL, go to
Setting Holiday ABC Schedules for additional instructions.
Note: After Selecting the day of the week or holiday for
the schedule to begin, the keypad displays any currently
programmed Opening and Closing times previously set for
that day. This feature allows you to review programmed
schedules at any time.
A schedule entered in HOL (holiday) activates and overrides
SUN MON TUE etc. schedules anytime a holiday date
occurs.
5. If Opening and Closing times display, the keypad then
displays DELETE KEEP. Select DELETE to enter new
times.
6. The keypad then displays OPENING TIME? followed by the
display MON – : AM PM. Enter the new opening time
and select AM or PM.
Enter all schedule times using a 12 hour clock. For example,
to enter 6 AM you would enter a 0 + 6 + 0 + 0 and select AM.
For 11 PM you would enter a 1 + 1 + 0 + 0 and select PM.
The keypad then displays CLOSING TIME? followed by the
display MON – : AM PM. Enter the new closing time
and select AM or PM. Select whichever day displays, for
example, MON, allows you to scroll through the days of the
week and create a schedule window that spans multiple
days.
Note: You must enter an Opening and Closing time or the
system will not recognize the schedule.
The new schedule is now programmed into your system.
7. The keypad goes back to the SUN MON TUE WED display
allowing you to enter another schedule.
8. To clear a schedule press DELETE and then AM when the
opening time is requested.
Press the Back Arrow key to exit the User Menu.