User`s guide
30 XR500/XR100 User’s Guide User Menu
XR500/XR100 User’s Guide 31User Menu
Browser Feature
Refer to Appendix B in this guide for a diagram showing you how to
use the Change User Proles browser.
Deleting User Profiles
1. Access the User Menu.
2. Press COMMAND until USER PROFILES? displays.
3. Press any Select key. The keypad displays ADD DEL CHG.
4. Select DEL to delete a user prole.
5. At the PROFILE NO: - option, enter a prole number and
press COMMAND. The display changes to DELTD.
Note: User codes assigned to deleted proles will not function.
Browser Feature
Refer to Appendix B in this guide for a diagram showing you how to
use the Delete User Proles browser.
TEMP CODE
When you select YES for this menu option, and this prole is
assigned to a user code (see next section), the keypad displays
TEMP EXPIRE DATE:. Enter the ending date for the prole to
expire. Default is seven days from today. The system deletes
Temp users at 12:00 AM on the last date.
ANTI PASS NO
Anti-passback requires that you properly exit (egress) an area
previously accessed. If you fail to exit through the proper
location you cannot access it until you properly exit. Default is
No. See Failed to Exit (Anti-Passback) for more information.
SHIFT TIME ACCESS: 1 2 3 4 ANYTIME
This menu option denes the time schedules that the User Code
operates for door access and disarming. Selecting 1, 2, 3, and/or
4 indicates operation during the S1-S4 shift schedules. Selecting
ANYTIME from the menu indicates the code operates any time,
regardless of schedules. An asterisk displays next to the shift or
Anytime choice. You may select all shift schedules for one user.
Menu access is not affected by this option. An UNAUTHORIZED
ENTRY message is sent to the central station if disarming occurs
outside the open/close schedule.
RE ARM DELAY
RE ARM DELAY allows the entry of 0 to 250 minutes to be used to
delay automatic rearming when the user disarms an area outside
of schedule. If zero is selected, the rearming occurs based on
permanent programming in the panel.
RE ARM DELAY is also used to delay a late to close message to the
central station when the panel does not use automatic arming.
If the user has Extend Schedule authority, 2HR 4HR 6HR 8HR
displays at disarming. If the user does not make a choice, the RE
ARM DELAY is used to extend the schedule.
Application example: An exit door near the trash is scheduled
to be armed at all times. When the custodian needs to remove
trash, program 10 minutes for the activity. Or, an overhead door
only requires access when a delivery is made. Program up to 250
minutes to allow the loading doc supervisor to load or unload a
semi-truck.
Browser Feature
Refer to Appendix B in this guide for a diagram showing you how to
use the Output Group browser.