User`s guide
30 XR500/XR100 User’s Guide User Menu
XR500/XR100 User’s Guide 31User Menu
User Menu Assignments - Each user prole may have any of the
menus assigned to it as shown in the User Prole Record. The
User Prole Record lists the user menu prole assignments and the
system functions users are allowed to access based on the prole
numbers assigned to their codes.
Adding User Profiles
1. Access the User Menu. Press COMMAND to USER PROFILES?.
2. Press any Select key. The keypad displays ADD DEL CHG.
Select ADD to add a new user prole.
3. At the PROFILE NO: - option, enter an unused prole number
and press COMMAND. The display changes to PROFILE
NAME.
4. Press any Select key. Enter a prole name of up to 16
characters. Press COMMAND. See Appendix C.
5. At the ARM/DIS AREAS: option, select the area numbers for
arming and disarming assigned to this prole.
6. The keypad displays ACCESS AREAS: . Select the area
numbers assignment to allow door access for this prole.
Press the COMMAND key.
7. The keypad displays OUTPUT GROUP: -. Enter the number
for the Output Group assigned to this prole. Press the
COMMAND key.
8. The keypad displays each of the menus as shown in the
Prole Table for you to enable for this prole number.
Select YES or NO and press the COMMAND key to advance to
the next menu Selection.
9. When you have completed selecting all User Prole menu
assignments, the keypad displays the PROFILE ## ADDED
message for 4 seconds.
Browser Feature
Refer to Appendix B in this guide for a diagram showing you how to
use the Add User Proles browser.
Changing User Profiles
1. Access the User Menu.
2. Press COMMAND until USER PROFILES? displays.
3. Press any Select key. The keypad displays ADD DEL CHG.
4. Select CHG to change a user prole.
5. At the PROFILE NO: - option, enter a prole number and
press COMMAND. The display changes to PROFILE NAME.
Note: The panel’s authority check determines whether your
User Prole is authorized to change another prole. The
message NO AUTHORITY appears if you are not authorized
to change the prole.
6. Press any Select key to display -. Enter a prole name of up
to 16 characters. The default Prole Name uses the Prole
Number. Enter the name and press COMMAND.
7. At the ARM/DIS AREAS: option, enter the area numbers for
arming and disarming assigned to this prole.
8. The keypad displays ACCESS AREAS: . Enter the area
numbers assignment to allow door access for this prole.
Press the COMMAND key.
9. The keypad displays OUTPUT GROUP: -. Enter the number
for the Output Group assigned to this prole. Press the
COMMAND key.
10. The keypad displays each of the menus as shown in the
Prole Table. You then enable or disable the menu function
for this prole number. Select YES or NO and press the
COMMAND key to advance to the next menu selection.
11. When you complete Selecting all User Prole menu
assignments, the keypad displays the PROFILE CHNGD
message for 4 seconds, indicating the prole is changed.