User`s guide

22 XR500/XR100 User’s Guide Arming and Disarming
XR500/XR100 User’s Guide 23
User Menu
Keypad Shortcut Keys
Your LCD keypad provides one-button shortcut keys. Holding down
a keypad button for two seconds until the tone re-sounds allows
you to arm, monitor, or reset your system. These options can still
be accessed through the User Menu if desired.
1 2 3 4
9 0
CMD
5 6 7 8
A
C
B
D
F
E
G
I
H
J
L
K
V
X
W
S
U
T
P
R
Q
M
O
N
Y
Z
Away
All
Sensor R
eset
(Fire Reset)
Home
Monitor
(Chi
me)
Perimeter
Sleep
Keypad Shortcut Keys
Keypad Key Arming System Operation
Press Key 1 Arm Away for Home/Sleep/Away systems
Arm All for All/Perimeter systems
Press Key 2 Sensor (Fire) Reset on all systems
Press Key 3 Arm Home for Home/Sleep/Away systems
Press Key 5 Monitor (Chime) on all systems
Press Key 6 Arm Perimeter for All/Perimeter systems
Press Key 7 Arm Sleep for Home/Sleep/Away systems
Arming Function
System Operation: Home/Sleep/Away, or All/Perimeter.
You can use the Arming shortcut keys, 1, 3, 6, and 7 when the
system is disarmed. You may be prompted to enter your user
code. If any zones are faulted, select force arm or bypass. Refer
to the Arming Section for detailed arming operation.
Home/Sleep/Away Arming
Arm Home — Press 3 for 2 seconds to arm the perimeter.
Arm Sleep — Press 7 for 2 seconds to arm the perimeter and
interior areas and leave the bedroom area off.
Arm Away — Press 1 for 2 seconds.
All/Perimeter Arming
Arm Perimeter — Press 6 for 2 seconds.
Arm All— Press 1 for 2 seconds.
Sensor (Fire) Reset Function
System Operation: Area, Home/Sleep/Away, or All/Perimeter.
You can use the Sensor (Fire) Reset, shortcut key 2, when the
system is armed or disarmed. When pressed, detectors that have
latched due to an alarm condition are returned to normal function.
The keypad displays SENSORS ON and SENSORS OFF to acknowledge
the shortcut key press.
Note: You may be prompted to enter your User Code.
Monitor (Chime) Function
System Operation: Area, Home/Sleep/Away, or All/Perimeter.
You can use the Monitor (Chime), shortcut key 5, when the
system is disarmed. When pressed, the Zone Monitor operation
is initiated. As needed, refer to the Zone Monitor section. The
keypad displays MONITOR ON and chimes or displays MONITOR OFF
and no tone is sounded.
Note: The Monitor (Chime) shortcut key applies to all Exit zones
in an Area system and to all zones assigned to the perimeter in a
Home/Sleep/Away or All/Perimeter system.