User guide

8. If (Current setting: SSL without two-way authentication) appears at
item 2 in the SMI-S main panel, type 2.
If (
Current setting:SSL with two-way authentication) appears in the
SMI-S main panel, skip to step 11.
When you type 2 in the SMI-S main panel, a submenu appears as in the
example shown below.
You must stop the Device Manager Server before specifying this setting.
1) SSL without two-way authentication
2) SSL with two-way authentication
>
9. Stop the Device Manager server, if running, as indicated in the displayed
message.
– In Windows, select Start, All Programs, Hitachi Storage Command
Suite, Device Manager, then Stop Server.
– In Solaris or Linux, execute the following command:
installation-directory-for-the-Device-Manager-
server/suitesrvcntl -stop_hdvm
10. Type 2 in the submenu.
The mofcomp command is executed and the MOF file is compiled. You are
returned to the SMI-S main panel when the mofcomp command has
completed execution.
Cautions:
• If you type the same number as the current setting, you are
immediately returned to the SMI-S main panel.
• If mofcomp command execution fails, the following message appears:
The compilation of the MOF file failed. In this case, collect all
files in the following directory, and then contact maintenance
personnel.
– Windows:
installation-folder-for-the-Device-Manager-
server\HiCommandServer\wsi\server\jserver\mof
– Solaris or Linux:
installation-directory-for-the-Device-Manager-
server/HiCommandServer/wsi/server/jserver/mof
1-36 Overview and Setup of CIM/WBEM
Hitachi Device Manager SMI-S Provider Installation and User Guide