User guide

Preparations in the host that acquires performance information
Configure the settings shown below for the performance information-acquiring
host:
To configure the settings:
1. Install the Device Manager agent.
To acquire performance information, a CCI/LIB is necessary. If you install
the Device Manager agent on a host, a necessary CCI/LIB is installed.
However, if a CCI/LIB is already installed on the host, it is not overwritten.
In this case, verify that the CCI/LIB version is 01-12-03/03 or later.
2. Specify settings for central management. (recommended)
3. Write the command device settings in the perf_cmddev.properties file.
To write the settings in the perf_cmddev.properties file, execute the
perf_findcmddev command or edit the file directly. For details, see Settings
in the perf_cmddev.properties file. For details about the perf_findcmddev
command, see Format of the perf_findcmddev command
.
Overview and Setup of CIM/WBEM 1-21
Hitachi Device Manager SMI-S Provider Installation and User Guide