User guide

Changing the Port Number
In the initial state, the port numbers used by the CIM/WBEM features are as
follows:
• HTTP port number: 5988
• HTTPS port number: 5989
To specify the port number:
1. Change the port number set in the Device Manager server property
file (
server.properties). For details, see the server.properties file.
– To change the HTTP port number:
Change the port number set in
server.cim.http.port.
– To change the HTTPS port number:
Change the port number set in
server.cim.https.port.
2. Restart the Device Manager server.
– In Windows:
Select Start, All Programs, Hitachi Storage Command Suite,
Device Manager, and then Stop Server.
When the Device Manager server has stopped, select Start, All
Programs, Hitachi Storage Command Suite, Device Manager, and
then Start Server.
– In Solaris or Linux, execute the following command:
installation-directory-for-the-Device-Manager-server/
suitesrvcntl -
stop_hdvm
When the Device Manager server has stopped, execute the following
command:
installation-directory-for-the-Device-Manager-server/
suitesrvcntl -
start_hdvm
The following shows an example of executing the commands:
# /opt/HiCommand/suitesrvcntl -stop_hdvm
# /opt/HiCommand/suitesrvcntl -start_hdvm
Overview and Setup of CIM/WBEM 1-9
Hitachi Device Manager SMI-S Provider Installation and User Guide