User guide

From a CIM client, you can specify a namespace by using the following
procedure:
• Specify the SMI-S version.
Specify
root/smis/smisxx (xx is an abbreviation for the version number).
For example, to specify version 1.2.0, enter
root/smis/smis12
The latest namespaces that complies with the specified SMI-S version is
selected.
• Specify the condition current.
Enter
root/smis/current.
The current namespace is selected.
Note: If you need to specify the namespace dmxx (xx is an abbreviation for
the version number) that was supported by Device Manager 5.8 or earlier
versions, contact maintenance personnel.
The following table outlines the relationship between the namespaces
supported by Device Manager and the SMI-S versions.
Table 1-1 Correspondence Between Namespaces and SMI-S Versions
Namespace SMI-S
Root/hitachi/smis10 1.0.2
Root/hitachi/smis11 1.1.0
Root/hitachi/smis12 1.2.0
Root/smis/current 1.2.0
You can obtain information about:
CIM at: http://www.dmtf.org/home/
SMI-S at: http://www.snia.org/smi/home/
Overview and Setup of CIM/WBEM 1-3
Hitachi Device Manager SMI-S Provider Installation and User Guide