Specifications

1070 072 131-102 (96.08) GB
BUEP03E Protocol8-20
Job parameter list:
Parameter word Contents
PW5 No. of start characters No. of end characters
End characters:
0 : No end condition
1 : One end character
2 : Two end characters
Start characters:
0 : No start condition
1 : One start character
2 : Two start characters
The start characters may occur in the data flow. If only one end character
has been defined, it must NOT occur in the data flow; otherwise the Re-
ceive process is terminated. However, if two end characters are defined,
any number of end characters may occur in the data flow, provided one
end character is not directly behind the other. If one end character is di-
rectly behind the other, the Receive process is always terminated.
Parameter word Contents
HIGH byte LOW byte
PW6 2nd start character 1st start character
These start characters are only considered when the number has been
specified in the HIGH byte of PW5, otherwise they are ignored.
Parameter word Contents
High byte LOW byte
PW7 2nd end character 1st end character
These end characters are only considered when the number has been
specified in the LOW byte of PW5, otherwise they are ignored.