Specifications

1070 072 131-102 (96.08) GB
BUEP19E Protocol 7-1
7 BUEP19E Protocol
7.1 Introduction
The BÜP19E transfer protocol (BOSCH Übertragungs-Protokoll) can be
loaded into the R500 and R500P computer interface modules. It transfers
data by means of a point-to-point connection.
As a result, data can be exchanged between two computer interface mo-
dules or one computer interface module and a central processing unit or
an SK500 module.
Data can also be exchanged between a computer interface module and a
computer.
The ‘PG Protocol Loader' loads the BÜP19E transfer protocol into Chan-
nel 0 of the R500P interface module. On the R500 Computer interface
module, the protocol can either be loaded into Channel 0, Channel 1 or
simultaneously into both channels. As a result, the user is presented with
flexible options regarding the use of the BÜP19E protocol on the compu-
ter interface module.
The RST and PST abbreviations occur frequently in this description and
are defined as follows:
RST - Requesting station
Specifies the communications partner which starts the protocol job.
PST - Peripheral station
Specifies the communications partner which responds to a received
protocol job.