Specifications

1070 072 131-102 (96.08) GB
R5CON Confirmation Module 6-3
6.2.2 Output Parameters
Parameter Att. Description
P2 W Job number
In this parameter the R5CON writes the job number of the job whose
status and error codes are in the P3 and P4 output parameters.
If an explicit job number was indicated in P1, this job number is mirrored
in the P2.
If no job has ended with P1 = FFFFH according to the parameterisation,
the value FFFFH is signalled back to P2 as a job number.
If there is no defective job according to parameterisation of the P1 =
FFFEH, however one or more jobs ended without a fault message, the
value FFFEH is signalled back to the P2.
Parameter Att. Description
P3 W Status
The current status of the job is output to this word for every program cycle
of the R5CON. The current status of the job is indicated in the HIGH byte
of this word.
High byte Explanation
00H Job ended without fault (concluded)
01H Job being processed on the CXN
02H Job is in the CXN queue
03H Job ended with fault(s)
04H No job with this job number being processed
Fig. 6-2 R5CON — HIGH Byte status