Specifications

1070 072 131-102 (96.08) GB
Hardware Description 2-11
2.7 Status Displays
There is a status display for each channel of the R500 computer interface
module. Channel-specific statuses and fault messages are displayed.
The H31 seven-segment display is connected to the X31 interface and
the H32 to the X32 interface.
2.7.1 Channel-specific Displays
These messages are directly allocated to the corresponding channel and
consequently to this protocol.
Code Explanation
. Centralised job is being processed. The centralised job is
displayed by activating the decimal point.
P Protocol fault,
- Fault while programming the protocol memory
- no protocol loaded
0..F Job number (hex.) of a defective job
2.7.2 Channel-independent Displays
These messages concern the entire module and appear either on the lo-
wer display or on both displays.
Code Explanation
H Hardware fault
P flashes Flash memory is being loaded by the PG utility program