Specifications

1070 072 131-102 (96.08) GB
Hardware Description2-6
2.6.1 R500 Block Address
The R500 occupies a block on the CL400/CL500 system bus.
The R500 block address is selected by means of the S1 DIP switch.
The setting procedure is similar to that used with all other modules belon-
ging to the CL400/CL500 PLC series.
2.6.2 Protocol-specific DIP Switch Settings
Protocol-specific settings are implemented on the S2 DIP switch. For this
purpose, switch segments SS1 through SS4 have been assigned to
Channel 0 and switches SS5 through SS8 to Channel 1.
• BÜP19E protocol, refer to Page 7-2
• BÜP64 protocol, refer to Page 9-2