Specifications

1070 072 131-102 (96.08) GB

BUEP64 Protocol 9-31

9.12 Job Parameterisation Examples

9.12.1 SEND Job (CL500 -> CL300)

Nine (9) words, beginning with the byte address 26H (word number 13H),

are written, without coordination, from the DM17 data module in the

ZS500 with block address 10H to the DM35 data module in the ZE301

from byte address 64H (word number 32H). The transfer is processed by

Channel 1 of the R500 with the number 2 (CXN2, see R5INIT parameteri-

sation); the job receives job number 4.

The job is parameterised as follows:

Param. word Contents Explanation

PW1 --- No entry

PW2 0201H CXN2, Channel 1

PW3 4H Job number 4

PW4 4101H Output job (SEND) / word

PW5 4444H RST code: DM PST code:

PW6 11H RST address: DM number 17

PW7 10H RST address: Block addr. ZS2 = 10H

PW8 13H RST address: Data-word no. 19

PW9 23H PST address: Data-word no. 35

PW10 --- No entry

PW11 32H PST address: Data-word no. 50

PW12 9H Volume of data: 9 words

PW13 FFFFH Without coordination

PW14 --- No entry

PW15 --- No entry

PW16 --- No entry

Fig. 9-16 BÜP64 — Example of SEND parameters (CL500 -> CL300)