Specifications

1070 072 131-102 (96.08) GB
BUEP64 Protocol 9-9
9.4.1.2 Response Message
A response message is expected after a command message has been
issued. Depending on the selected baud rate, the following times must be
observed:
The monitoring time is dependent on the baud rate (bps).
19200 - 1200 = 5 sec.
600 = 7 sec.
300 = 10 sec.
150 = 15 sec.
110 = 20 sec.
STX (start character)
DLE (positive acknowledgement)
Acknowledgement delay time ADT
3964 -> 550 ms
3964R -> 2000 ms
1st byte 00H
2nd byte 00H
3rd byte 00H
4th byte Fault number
DLE (end identifier)
ETX (end identifier)
BCC (checksum)
DLE (positive acknowledgement)
Acknowledgement delay time ADT