Specifications

Server Wide Settings
PlantScape Server and Client Configuration Guide 79
Station Alarm Settings
Use Station Alarms on the Server Wide Settings display to specify settings for
alarms:
Enabling and Disabling Hardware
Use the Enable and Disable Hardware control to specify:
Alarm Summary Options
Use the Alarm Summary Options on the Server Wide Settings display to specify
the following:
Property Description
Audible active time The duration of audible alarms. For example, if you
specify 10 seconds, the alarms sound for 10 seconds
each, unless the operator silences the alarm by
acknowledging it before the 10 seconds has passed.
Audible re-alarm time The time period after which the audible alarm sounds
again after the period specified in the Audible active
time field expires. For example, if you specify 60
seconds, an unacknowledged alarm sounds 60 seconds
after it last stopped sounding, until it is acknowledged.
Alarm line shows Specifies which unacknowledged alarm is displayed in
Station alarm lines if there is more than one at the
highest priority.
Property Description
Minimum Security Level
Required
The minimum security level for enabling and disabling
channels, controllers, points and printers.
Property Description
Enable individual alarm
priority
Changes the behavior of the High and All options on
the Alarm Summary.
Enable full page alarm
acknowledgement
Activates a button on the Alarm and Message Summary
displays that operators use to acknowledge a full page
of alarms.
plscpcg.book Page 79 Monday, May 28, 2001 10:11 AM