Specifications

5 – Configuring Stations and Printers
78 R400
Server Wide Settings
Use the Server Wide Settings display to define:
• General Station settings
• Station alarms
• Security level required for enabling and disabling hardware
• Alarm summary options
General Station Settings
Use General Station Settings on the Server Wide Settings display to specify the
following:
Property Description
System start up page The default startup display:
• On connection to the server and on idle timeout for
rotary Stations.
• On initial connection to the server for static Stations.
Select Timeout The time, in seconds, an alphanumeric field on a Station
display can remain selected before being automatically
deselected.
Idle Timeout The time, in seconds, a Station display remains active
without any operator activity before reverting to the
lowest level of security and (optionally) changing to a
different display.
For rotary Stations, the connection is closed so that it is
available to another Station.
Changes to the idle timeout value are not effective until
Station reconnects to the server.
Fast raise/lower step The percentage amount by which the value of a
selected field can be raised or lowered in all Station
displays when using the fast raise/lower function keys:
Note that for Set Points (SP) and Output Values (OP)
with specified limits, the Fast Raise/Fast Lower function
key cannot be used to increase or decrease the field
value of those points beyond their specified limits.
plscpcg.book Page 78 Monday, May 28, 2001 10:11 AM