Specifications

Using Station for Configuration
PlantScape Server and Client Configuration Guide 67
Using Station for Configuration
You use displays in Station to complete other configuration tasks that are not
covered in Station setup or station.ini. You also use Station to configure
server wide settings.
Configuring Timeout
To specify idle timeout and select timeout:
1 From the System Configuration Menu display, click Server Wide Settings.
This calls up the Server Wide Settings display.
2 Enter the required timeout settings as described in “General Station Settings”
on page 78.
Configuring Startup Pages
To configure a system-wide startup page:
1 From the System Configuration Menu display, click Server Wide Settings.
This calls up the Server Wide Settings display.
2 Enter the required page number or name as described in “General Station
Settings” on page 78.
To configure a startup page for a static Station:
1 In the Station Summary display, click the number or title of the Station you
want to configure. This calls up the Station Configuration display.
2 Specify the required page number or name as described in “Start Up/Idle
Timeout Action” on page 81.
The startup page for a rotary Station is specified on the Connections tab of the
Connection Properties dialog box. For more information see “Connection
Properties Dialog Box” on page 69.
Setting the Fast Raise/Lower Step
To specify the fast raise/lower step:
1 From the System Configuration Menu display, click Server Wide Settings.
2 In the Fast raise/lower step field, enter the required percentage
increment/decrement as described in “General Station Settings” on page 78.
plscpcg.book Page 67 Monday, May 28, 2001 10:11 AM