Specifications

21 – Command Reference
504 R400
station
Description
station starts Station.
Syntax
station [setupfile] [-s[f][x][s][c]][-z[1|2|3]]
[-t tracefile]
Notes
• The folder in which Station is located must be specified. If you want to run
the utility from the Command prompt, that you must first change to the
Station folder before running the command.
Example
This example uses opsetup.stn as the setup file, trace.txt as the file for
trace data, and disables window sizing and the Exit and Setup menu items.
station.exe opsetup.stn -sfxs -t trace.txt
Part Description
setupfile The default Station setup file. If no file is specified,
default.stn is used.
-sf Disables window resizing so that Station can only
operate in full screen mode.
-sx Disables the Exit menu item.
-ss Disables the Setup menu item.
-sc Disables the Connect menu item.
-z[
n ] The zoom level used when Station is started:
-z1 Starts Station at the largest window size for the
current resolution.
-z2 Starts Station at the second largest window size for
the current resolution.
-z3 Starts Station at the third largest window size for
the current resolution
If not specified, Station starts up in full screen.
-t
tracefile The file to which trace data is copied.
plscpcg.book Page 504 Monday, May 28, 2001 10:11 AM