Specifications

3 – Configuration Tutorial
30 R400
4 Select the point item in the item list, and complete the fields on the Main tab
as follows:
a) In the Description field, type Pump Status.
b) From the PV Scan Period drop-down list, select 5 seconds.
c) From the Number of States drop-down list, select 2.
d) In the State 0 field, type OFF.
e) In the State 1 field, type ON.
5 Select the ... button next to the PV Source Address field.
This displays the Address Builder dialog box.
6 Complete the fields in the Address Builder dialog box as follows:
a) From the Address Type list, select CONTROLLER.
b) From the Controller Names list, select ABR-PLC5-1.
Figure 3.16 Status Point Main Tab
plscpcg.book Page 30 Monday, May 28, 2001 10:11 AM