Specifications

Extended Event Archiving System Configuration
PlantScape Server and Client Configuration Guide 385
Extended Event Archiving System Configuration
To configure Extended Event Archiving:
1 On the System Configuration Menu display click Extended Event Archiving.
This calls up the Extended Event Archiving Configuration display.
2 You use the fields and settings in the Extended Event Archiving
Configuration display as follows:
Property Description
Extended Event
Collection
(Enable/Disable)
Use this button to switch event collection on or off. If
collection is disabled, events occurring until it is re-enabled are
not stored in the extended event file.
Extended Event
Archiving Status
The status of the archiving system can be either OK, Overload,
Failed, Full Disk, or Copy Mode.
For a description of each status, see Table 19.1, “Extended
Event Archiving Status,” on page 389.
Extended Event
Archiving Alarms
Priority
This defines the priority of the alarm that will be generated by
the extended event archiving system.
Extended Event Cycle
Period (seconds)
The cycle period defines how often events are copied from the
event file by the archiving system into the online extended
event file. The default value is 300 seconds (5 minutes).
plscpcg.book Page 385 Monday, May 28, 2001 10:11 AM